Ring Battery Doorbell PRO Brick Extension - 9/16in Wide - FULL Offset Over Side of Brick

This mount is a fixed Brick extension mount to Fit Ring PRO (also fit all Ring models with Removable Batteries inculding Ring 2/3/3+/4) Newest 2024 Doorbell

This is made to put the doorbell past the bricks if your doorbell is mounted to trim.  It offsets the doorbell over the bricks and away from the door.  So if doorbell is too close to the swing of the door, this is what you will need.  Different Extesnsion Lengths starting at 1/4in.

THIS IS THE FULL OFFSET ---  FULL OFFSET MEANS THE DOORBELL IS FLUSH WITH THE SIDE OF THE MOUNT AND IS AS FAR OVER THE BRICKS AS POSSIBLE.

If you dont need the full offset and you want an extension that is about $10 cheaper the standard offset leaves about 5/8in on the door side.   The listing can be found by clicking the picture below:

If you have angled trim you can get angled shims to make sure your brick extension is perpendicular:

If you have a gap where you hole for your doorbell wire is far from your brick, you have a few options.   

You can 

1.  Install a Bottom Filler Spacer Plate -  Also Correct Angled Trim too in Combination.

2.  Provide a bottom Mouse Hole in the Brick Extension

3.  Add Body Shim Filler Plate

 This Mount fits this Doorbell found on Amazon (affiliate link below)

NORMAL COLOR is Black, if you need to purchase a different color, there will be a color change request listing to change the color.

Color Change Request

Be sure to send me a picture of your doorbell and where you want to mount it. Message me by email at shop@doorbellmount.com or text me at 318-759-7425.  

All my mounts have holes to allow for wire passthrough.

****While 3D printing provides really good production quality parts, there are often imperfections that may be found on the prints. These do not impair the function and rarely affect the aesthetics. But if your not happy with the quality, please text, email, or message me before leaving a review.